How to Use Your Financial Statements to Find Your Most Profitable Products and Services

Nguyen & Company, CPA11 min read
On this page
  1. 01The Question Most Owners Can't Answer
  2. 02Why Revenue Is the Wrong Number
  3. 03How to Find Your Margins in a Smaller Business
  4. 04How to Find Your Margins in a Larger Business
  5. 05What to Do With What You Find
  6. 06A California Note on Labor Costs
  7. 07Example for a Smaller Business: A Landscaping Company
  8. 08Example for a Larger Business: An HVAC Company
  9. 09What to Do Next
  10. 10Questions
Key takeaways
  • The service that brings in the most revenue is not always the most profitable. Gross margin, the share of each sales dollar you keep after paying the direct costs of delivering a service, tells you which services are worth protecting.
  • Smaller businesses can find their margins with a simple yearly spreadsheet built from invoices, bills, and hours records. Larger businesses with several service lines and shared staff get more reliable numbers by setting up their books to track each service line every month.
  • A service with a 60% gross margin contributes more to your business than one with a 20% margin, even if the 20% service brings in more total revenue.
  • Repricing a low-margin service, lowering what it costs to deliver, or moving staff time toward higher-margin work often does more for your bottom line than adding a new service. Before you cut a low-margin service, check whether it brings in your more profitable work.
  • In California, the full cost of an employee is well above their wages once payroll taxes, workers' compensation, paid sick leave, and benefits are included. Margins calculated on wages alone will look better than they really are.

The Question Most Owners Can't Answer

Most business owners can name their best-selling service right away. Far fewer can say with confidence which service makes them the most money.

That gap is a problem. Every decision about where to spend your time, what to hire for, what to promote, and what to expand depends on knowing which services actually earn their keep. Without that number, you may be putting your best people and your marketing budget behind the wrong work.

Your financial statements can answer the question. How much setup that takes depends on the size of your business, so this article covers a simple method for smaller businesses and a more detailed approach for larger ones.

Why Revenue Is the Wrong Number

Revenue tells you how much money came in. It does not tell you how much it cost to earn that money.

Two terms help here. A service line is a group of related services you sell, such as installations and repairs at an HVAC company, or tax preparation and advisory work at an accounting firm. Direct costs are the costs of delivering a specific service, such as the staff hours spent on it, materials, equipment, and subcontractors. Rent, office staff, and insurance are overhead rather than direct costs, because you pay them no matter which service you sell.

Gross margin brings the two together. It is the share of each sales dollar left after paying the direct costs of that service:

Gross Margin = (Revenue − Direct Costs) ÷ Revenue

A service with a 75% gross margin keeps 75 cents of every dollar to cover overhead and profit. A service with a 20% gross margin keeps 20 cents.

That is why a bigger service is not always a better one. A service that brings in $200,000 a year but costs $160,000 to deliver produces $40,000 in gross profit, a 20% margin. A service that brings in $80,000 and costs $20,000 to deliver produces $60,000 in gross profit, a 75% margin. The smaller service contributes more to the business.

When owners run this analysis for the first time, the results often surprise them. The best-selling service frequently has a lower margin than expected, meaning it keeps less of each dollar, because services that are easy to sell are also easy for competitors to offer, and that holds prices down. Specialized services often keep more of each dollar, because fewer competitors offer them. One or two services may not even cover their own direct costs once all the staff time spent on them is counted.

How to Find Your Margins in a Smaller Business

If you have a small team and a handful of services, you do not need to restructure your books. A simple spreadsheet built from records you already keep will tell you most of what you need to know.

  1. List each service and the revenue it brought in last year. Your invoices or sales reports will show this. If your income accounts are already split by service, your profit and loss statement (P&L) shows it directly.
  2. Add up the direct costs of each service. Your bills show materials, subcontractors, and any software used only for that service. For staff time, pull hours by job or client from your timesheets, scheduling app, or payroll system, and multiply them by each person's fully loaded hourly cost, which the California note below explains. Count your own time as well, valued at what it would cost to pay someone else to do that work.
  3. Calculate the gross margin of each service. Subtract the direct costs from the revenue, then divide the result by the revenue.

The result will be less precise than a full accounting setup, but it is based on actual records, and it will show whether the gap between your services is large enough to act on. For most smaller businesses, repeating it once a year is enough.

How to Find Your Margins in a Larger Business

Once you have several service lines, staff who work across them, and revenue in the millions, a yearly spreadsheet is no longer enough. Your books should record revenue and direct costs by service line every month, so the margins are ready whenever you need to make a decision. There are two common ways to set this up.

Class tracking labels each transaction with the service it belongs to. When your bookkeeper records a sale or a cost, they also tag it with a class, such as "Installations" or "Repairs." You can then run a P&L by class and see the revenue, direct costs, and gross profit for each service. In QuickBooks Online, classes are available on the Plus and Advanced plans.

Separate accounts give each service its own lines on the P&L. Some businesses create a separate income account for each service, such as "Revenue – Installations" and "Revenue – Repairs." If the direct cost accounts, often called cost of goods sold (COGS), are split the same way, the P&L will show the margin for each service.

Either method also needs a way to handle shared labor. If the same staff work across several services, their time has to be recorded by job or by service, usually through timesheets or scheduling software, so that their labor cost is assigned to the right service line. Setting this up is a project for your bookkeeper or accountant, but it gives you margin data for every pricing, hiring, and capacity decision that follows.

What to Do With What You Find

Once you know the gross margin of each service, meaning the share of each sales dollar that service keeps after its direct costs, you have four options for any service that is underperforming.

Raise the price. If customers will accept a higher price, most of the increase goes straight to gross profit, because the cost of delivering the service does not change. A price increase only helps if you keep most of your customers, so watch for lost business after the change.

Reduce the cost of delivery. Look at the people who deliver the service, the process they follow, and the systems they use. A different staffing mix, a simpler process with less rework, or better scheduling software can each improve margin without changing the price.

Shift capacity toward higher-margin work. If your team's hours are fully booked, the most profitable use of those hours is the highest-margin service you can sell. Every hour you move from a 20% margin service to a 60% margin service adds to gross profit.

Stop offering it. If a service still loses money after you count all of its direct costs, and there is no clear way to fix it, it may be time to stop offering it. Before you do, check whether it brings in customers who later buy your more profitable services, as the second example below shows.

A California Note on Labor Costs

For most service businesses, staff time is the largest direct cost, so it needs to be counted at its full cost rather than at wages alone. This matters more in California, which adds employer costs that many states do not. California employers must provide at least five days (40 hours) of paid sick leave a year, and the state's workers' compensation premium rates were the fourth highest in the country in Oregon's 2024 national comparison, at about 170% of the national median.

A full-time employee earning $55,000 a year can cost $70,000 or more once you add employer payroll taxes, unemployment insurance, workers' compensation, paid sick leave, and benefits such as health insurance and retirement contributions. Nationally, benefits make up about 30% of what private employers spend on employee compensation (Bureau of Labor Statistics, June 2026).

Here is how that affects the margin on a single service. Suppose a job is priced at $800 and takes six hours of an employee's time. At a $55,000 salary, those six hours appear to cost about $159. At a fully loaded cost of $72,000 a year, they cost about $208. On 1,000 jobs a year, calculating labor at wages alone would overstate the gross profit on that service by about $49,000.

Example for a Smaller Business: A Landscaping Company

The two examples below are illustrative, with rounded figures.

A landscaping company in California has an owner and five crew members and brings in about $600,000 a year. Most of that comes from weekly maintenance contracts ($380,000). The rest comes from design and installation projects ($170,000) and irrigation repairs ($50,000). The owner assumed installation projects were the most profitable work, because each one brings in several thousand dollars.

Using last year's invoices, bills, and crew timesheets, the owner builds a simple spreadsheet. Weekly maintenance costs $255,000 to deliver in crew labor, fuel, and green-waste fees, a gross margin of 33%. Irrigation repairs cost $20,000 in parts and labor, a gross margin of 60%.

Installation projects cost $115,000 in plants, materials, crew labor, and equipment rental. That looks like a 32% margin, but the owner also spends about 12 unbilled hours designing and quoting each of the 25 projects a year. Valued at $50 an hour, that time adds $15,000 in cost and brings the margin down to 24%, the lowest of the three.

The owner makes two changes. The company now charges a $500 design fee, credited toward the project if the client goes ahead, so quoting time is paid for. It also offers a spring irrigation check to every maintenance client, which brings more of its highest-margin work onto the schedule. Neither change required new staff, new equipment, or new accounting software.

Example for a Larger Business: An HVAC Company

A 35-person HVAC company in California brings in about $5.2 million a year from three service lines: installations of new and replacement systems ($3.0 million), repair calls ($1.5 million), and annual maintenance agreements ($700,000). The owner has always treated installations as the core business, because they bring in the most revenue.

The company's books split revenue by service, but all labor and materials go into a single cost of goods sold account, and technicians move between installations, repairs, and maintenance visits during the week. To find the margin for each line, the company sets up class tracking and uses the hours recorded in its scheduling software to assign each technician's fully loaded labor cost to the right service.

Installations bring in $3.0 million and cost $2.4 million to deliver, including equipment, labor, permits, and warranty callbacks. That is a gross margin of 20%.

Repairs bring in $1.5 million and cost $780,000 to deliver, mostly in parts and labor. That is a gross margin of 48%.

Maintenance agreements bring in $700,000 and cost $560,000 to deliver, almost all of it in labor. That is also a gross margin of 20%.

The results raise two problems, and neither has a simple answer.

First, installations take longer than the company quotes. Job records show that installations quoted at 16 labor hours are taking about 22 hours on average, and return visits to fix problems after installation add more unbilled time. The company updates its quotes to reflect actual hours, raises installation prices by about 5%, and adds a start-up checklist to every installation to reduce return visits. These are changes to its process and pricing, not new hires.

Second, maintenance agreements look like the obvious service to cut, but the data shows they bring in other work. Agreement customers account for about 40% of repair revenue and most of the company's replacement sales. Instead of dropping the service, the company raises the annual agreement price and schedules maintenance visits in the slower spring and fall months, when technicians would otherwise be underused.

A year later, revenue has risen only slightly, to about $5.3 million, but gross profit is up by about $240,000. The gain did not come from selling more. It came from knowing which work to price higher, which work to protect, and where technicians' hours were actually going.

What to Do Next

If you run a smaller business, start with the spreadsheet method above, using last year's records. If you run a larger business, pull your P&L and check whether it breaks out revenue and direct costs by service line. If it does not, ask your accountant what it would take to set that up.

Whether you need a once-a-year margin check or books set up to track every service line, this is one of the more valuable things we help clients with. Once you know which services are actually profitable, every decision about pricing, hiring, and capacity rests on firmer ground.

Questions

Do I need class tracking to do this?

Not necessarily. For most smaller businesses, the yearly spreadsheet method gives you enough to make good decisions. Class tracking becomes worth the extra bookkeeping once you have several service lines and staff who work across them, because it keeps your margins up to date every month instead of once a year.

How often should I run this analysis?

Run it at least once a year, and again whenever you are considering adding a service, hiring, or changing prices. Margins shift as costs change, so a margin that looked healthy two years ago may look different after a round of wage increases.

What counts as a "good" gross margin?

It depends on the industry. As a general guide, a gross margin of 50% or higher on a service gives many service businesses enough room to cover overhead and still earn a solid profit. A service below 30% usually means you are working hard for a thin return, and it is worth understanding why before you put more capacity into it.

What if I only offer one service?

You can run the same analysis by client type, project type, or pricing tier. A firm that provides one service to 20 clients may find that some types of clients are much more profitable than others, which can change who you target and what you charge.

Do I need an accountant to do this?

Not always. A smaller business can build the yearly spreadsheet on its own, and if your books already use class tracking, you can run a P&L by class yourself in QuickBooks. Setting up class tracking or separate accounts, and deciding how shared labor costs should be assigned, is usually best done with an accountant, because that is the hardest part to get right.

Keep reading

How to Use Your Financial Statements to Find Your Most Profitable Products and Services · Nguyen & Company, CPA